Louvre Grating

Louvre Grating

Product information

Less transparency is sometimes what is required. In these cases the louvre grating is used. There are a large number of applications, which are not restricted only to floor coverings in the case of bridges, walkways and crossovers. As a sun shield or cladding element, the louvre grating is also used in the case of ventilation grilles, facades and suspended ceilings.

MEISER offers louvre grating in steel, aluminium and highgrade steel. The cross bars can be pressed in at an angle of 15°, 30° or 45°, so that varying degrees of transparency can be achieved. Please note in your planning that for this type of grating we are only able to produce cross bar lengths of up to 1,500 mm.

Note: A 15° crossbar inclination is technically only possible with a bearing bar thickness of 3 mm. Please contact us in advance.

Technical data

Common mesh spacing

Bearing bar

Cross bar

33,3 22,2 33,3 66,6
66,6 22,2 33,3 66,6
99,9 22,2 33,3 66,6

 

Standard bearing bar profiles

Bearing bar 2 mm

Bearing bar 3 mm

30/2 30/3
35/2 35/3
40/2 40/3
45/2 45/3
50/2 50/3
- 60/3
- 70/3
- 80/3
- 90/3
- 100/3

Accessories / Fixing clips

Welded - in Holed Fixing Plates
Welded - in Holed Fixing Plates

Consisting of welded-in holed plate hole size is according to

...show more

Welded - in Holed Fixing Plates

Consisting of welded-in holed plate hole size is according to customer‘s specifications; screws are provided by the customer.

Clamp B
Clamp B

Consisting of a saddle top clip, clamp lower part, M8x60

...show more

Clamp B

Consisting of a saddle top clip, clamp lower part, M8x60 hexagon screws and M8 square nut.