Springt zum entsprechenden Abschnitt auf dieser Seite
Spot-welded wire mesh from MEISER is versatile and suitable for securing areas and installations. They are attached on site or with prefabricated posts. The elements consist of cross-welded steel wires with diameters of 3 to 6 mm. Length and width can be freely selected within the production range. In the automotive industry, safety mats have established themselves as a proven solution for securing and accessing production lines. MEISER supplies all leading car manufacturers such as Audi, BMW, Mercedes and VW in accordance with the applicable standard.
MEISER safety mats can be used to safely cover large areas - for example in suspended ceilings, at the edges of platforms or along conveyor systems. The robust mats effectively reduce the risk of falling through and falling hazards and therefore make an important (...)
The safety mats are designed to meet the manufacturer's specific requirements. They are suitable for safely covering large areas, such as suspended ceilings, stage edges, or conveyor systems, and help reliably minimize the risk of falls and falling through.
MEISER safety mats are a reliable solution for protecting large areas, such as suspended ceilings, stage edges or conveyor systems. For the Audi/VW system, the specific requirements for structure and installation were specifically taken into account: Floor elements, side (...)
The plug-in system enables simple assembly and disassembly, reduced maintenance and downtimes, allows integrated inspection openings and customer-specific adaptations, and at the same time offers the highest flame-retardant effect and drainage.
Stephuit FH flame-retardant. State-of-the-art transformer trough cover!
Thanks to their excellent slip resistance and drainage effect, MEISER sheet metal profile gratings with serrated surfaces are ideal for industrial applications and areas where grease or oils are used.
The advantage of this design is its excellent slip resistance in all directions, which is created by the star-shaped serrated round perforations.
Thanks to its pronounced toothing, Tolplus N also has excellent stability and high stability. Like all other Stepbloc types, Tolplus N is well suited for use on catwalks, platforms and safety stairs.
DRAINSTEP RH3 is a sheet metal profile grating developed in 2013. Its features make it unique within MEISER’s sheet metal profile product line. With over 70% open cross-section, it ensures maximum drainage performance.
The extremely high serration of the strongly pronounced surface offers the best stability and high stability. The drainage effect is extremely high due to the steep positioning of the material.
Due to the serration of the highly pronounced surface, the grating has very good stability and also guarantees high slip resistance, especially in areas where grease and oil are used.
MEISER sheet metal profile steps can be manufactured from all available surfaces. Important criteria when choosing the right steps and ladder rungs are the required load and the intended use. We will be happy to advise you on this in order to find the optimum solution for safe standing.
MEISER ladder rungs are characterized by their perforated and embossed surface. They guarantee a secure footing in areas where maximum slip resistance is required.
MEISER spindle steps are available in many different surfaces. This results in a wide range of functional and design options in almost all areas.
MEISER sheet metal profile steps can be manufactured from all available surfaces.
Floor coverings and walkways as well as conventional covers for industrial applications that have to withstand the most adverse conditions - manufactured according to individual customer specifications.
MEISER also offers a conventional closed cover for industrial applications in the form of tear plates. Depending on our customers' requirements, the tear plates can be cut to size, perforated and countersunk, edged and supplied with a surface finish.
The Passcran walkway is a safe and robust solution for industrial walkways in demanding applications. Thanks to its sophisticated design, it offers a high level of safety and comfort combined with easy handling.
Nervopal is a functional flooring and walkway system that combines safety and stability with an open, practical surface. The perforations facilitate the drainage of liquids and help ensure a low-slip walking surface.
Nervopal smooth is a versatile and durable floor covering that is ideal for use in mobile and demanding environments. Thanks to its robust design, it offers safe and comfortable walkability even under difficult conditions.
A particular advantage of sheet metal profile gratings with slotted surfaces is their extreme transverse rigidity, which allows them to absorb a large point load.
This grating combines the advantages of a smooth surface and also offers excellent transverse rigidity. It is translucent and is mainly used where slip resistance is not required, for example as a shelf in shelving construction.
Tolroc N achieves good slip resistance thanks to its serrated, upwardly pronounced holes. A high point load is achieved thanks to its extreme transverse rigidity.
In addition to its high transverse rigidity, Stepplus O1 offers sufficient slip resistance. Compared to Stepplus N, however, the small embossings are not perforated.
This type offers an anti-slip surface and extreme transverse rigidity, which enables a high point load to be achieved. It also has a high drainage effect.
Sheet metal profile gratings with a closed surface combine the positive properties of the chequer plate with the advantages of sheet metal profile gratings.
Despite its closed surface, this type of grating has an anti-slip surface. The very small linear embossing gives the Aderstep G1 an aesthetic appearance.
A closed sheet metal profile grating for applications where a clear, uniform surface is required. The anodized aluminium design combines low weight with a high-quality appearance.
The closed surface means that levels can be covered opaquely. Nothing can fall through or seep through, but you still have a secure stand.
This version is used as a shelf in shelving construction and in areas where a smooth, closed surface is required. Other applications include wall cladding and suspended ceilings.
The surface structure is comparable to a tear plate, so that this product can be seen as an attractive alternative, albeit with a higher load-bearing capacity for larger spans.
The even alignment of the embossing makes Bostep G particularly suitable for large indoor areas. The closed surface covers levels opaquely and prevents objects from falling through.
Sheet metal profile gratings with a perforated surface are very versatile and can therefore be regarded as practical all-rounders in a wide variety of areas.
This grating offers non-slip safety and also prevents small parts from falling through. This enables safe walking and standing at great heights.
Thanks to its very large, upwardly embossed perforations, this grating offers extremely high slip resistance. Tolgrip N is mainly used indoors in the industrial sector for walkways and platforms.
Tolplan N can be used in areas where a slip resistance rating of R9 is sufficient.
The Tolpicot N has the same properties as the Aderstep N, but this type of grating has additional serrations
This type of grating has almost the same properties as the Toldeco 8, but the additional holes with a diameter of 10 mm allow even better drainage of liquids.
Toldeco 8 has small, upwardly pronounced holes that give the grating sufficient slip resistance thanks to additional serration.
A grate with small holes at the top and large holes at the bottom.
The Tolmixte N is equipped with the same features as the Stepclair N. However, the small, upward-facing holes are additionally serrated.
Stepclair O1 has a good drainage effect and good air permeability thanks to its large downward perforations.
Although the upward-facing embossing of the Stephuit O1 has no sharp edges, this grating ensures sufficient slip resistance.
This grating with its visually appealing round perforations is used in architectural applications, for example as sun protection or façade grating.
This sheet metal profile grating has different perforations, enabling different functions and properties.
The Formstep O6 is characterized by a smooth surface. It also allows a very high level of light transmission. This grating is used, for example, in areas of rack construction where trolleys run smoothly.
This grating has the same advantages as the Formstep N. However, here the large perforation is embossed at the top and the small holes face downwards. This optimizes the slip resistance of the Formstep O4.
This grating offers very good slip resistance. Its upwardly embossed perforations make it particularly suitable for indoor applications.
This grating is characterized by its anti-slip surface and high drainage effect. It is used in the industrial sector on service platforms, on catwalks, as a stair tread and as a plank in scaffolding construction.
The Aderstep N initially offers good slip resistance. In addition, the almost closed surface prevents small parts from falling through.
A universally applicable sheet metal profile grating that is characterized by good slip resistance due to its surface texture.
The small perforations at the top and the large perforations at the bottom give the grating its stability. These perforations also promote high slip resistance.
